• 19” standard rack mounting width, 1U height granularity for 10/100/1000 BASE-T ports is 64 Kb/s), • Supports up to 128 MAC addresses per port, • Broadcast/Multicast/Unicast Storm Control, • 802.1X Port and MAC-based Authentication, DEM-310GT: 1000BASE-LX, single-mode, 10 km, DEM-311GT: 1000BASE-SX, multi-mode, 550 m, DEM-312GT2: 1000BASE-SX, multi-mode, 2 km, DEM-314GT: 1000BASE-LHX, single-mode, 50 km, DEM-315GT: 1000BASE-ZX, single-mode, 80 km, DEM-331T: 1000BASE-LX, Wavelength Tx: 1550 nm, Rx: 1310 nm, single-mode, 40 km, DEM-331R: 1000BASE-LX, Wavelength Tx: 1310 nm, Rx: 1550 nm, single-mode, 40 km, DEM-330T: 1000BASE-LX, Wavelength Tx: 1550nm, Rx 1310nm, single-mode, 10km, DEM-330R: 1000BASE-LX, Wavelength Tx: 1310nm, Rx: 1550nm, single-mode, 10km, DEM-431XT: 10GBASE-SR SFP+ Transceiver (without DDM), 80m: OM1 & OM2 MMF, 300m: OM3 MMF, DEM-431XT-DD: 10GBASE-SR SFP+ Transceiver (with DDM), 80m: OM1 & OM2 MMF, 300m: OM3 MMF, DEM-432XT: 10GBASE-LR SFP+ Transceiver (without DDM), 10km, DEM-432XT-DD: 10GBASE-LR SFP+ Transceiver (with DDM), 10km, DEM-433XT: 10GBASE-ER SFP+ Transceiver (without DDM), 40km, DEM-433XT-DD: 10GBASE-ER SFP+ Transceiver (with DDM), 40km, DEM-434XT: 10GBASE-ER SFP+ Transceiver (without DDM), 80km, DEM-435XT: 10GBASE-LRM SFP+ Transceiver (without DDM), 220m, DEM-435XT-DD: 10GBASE-LRM SFP+ Transceiver (with DDM), 220m, DEM-436XT-BXD: 10GBASE-LR SFP+ Transceiver. 256 access list The DGS-1510 Series PoE-enabled switches are ideal for businesses looking to power VoIP phones, wireless access points or network cameras.      • Max.  • DEM-432XT-DD 10GBASE-LR SFP+ Transceiver (with DDM), 10km The DGS-1510 Series supports virtual stacking via D-Link’s Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. Storage Humidity   • Jumbo Frame up to 9000 Bytes Energy Saving  • DGS-1510-28P:  2  The DGS-1510 Series PoE-enabled switches are ideal for businesses looking to power VoIP phones, wireless access points or network cameras. View online or download D-link DGS-1510-28 Hardware Installation Manual  • DGS-1510-28P:  21 W  From Port / To Port Select the appropriate port range used for the configuration here.      • DSCP  • SSL Page 211: D-Link Discovery Protocol (Ddp) Client Commands DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide 23.      • Supports 128 static multicast addresses  • DGS-1510-28:  72.292 BTU/hr        • 11 x 7.09 x 1.73 inches (280 x 180 x 44 mm) Users can mix from any of the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting.      • MLD Snooping Querier Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Maximum Enter themaximum number of secure MAC addresses that will be  • ACL Actions  • Virtual Stacking Support      • Link Status The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments.      • Protocol type      • Supports 512 IGMP groups The DGS-1510 Series provides a reliable, scalable, and modular interconnection between core switches and edge switches with rich capabilities and simplified flexibility. Users can mix from any of the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. View and Download D-Link DGS-1510-20 hardware installation manual online. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment.      • Supports v2 With these capabilities, you can boost the efficiency of your network by offloading internal traffic-handling tasks from your router and allowing it to manage external traffic and security.      • 256 Static ARP Secure your Network Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only.      • 64 IPv4 Static Route Entries AAA   • DGS-1510-28:   • Default Routing  • DGS-1510-28:  15.2 W      • IP address Optional SFP+ Transceivers Managed switch, D-Link DGS-1210-20 (16+4 port), first access and basic setting.      • Support 4 mirroring groups VLAN, Quality of Service (QoS)  Operation Temperature  granularity for 10/100/1000 BASE-T ports is 64 Kb/s) The DGS-1510 Series is IPv6 ready and supports various IPv6 functions such as MLD Snooping, IPv6 ACL/QoS, and IMPBv6 to ensure seamless integration of next generation networks. Flexibility and Scalability  • 0% to 95% non-condensing  • Traffic Segmentation How to Configure Link Aggregation LACP - DGS-1510-28 Series? Use the no form of this command to disable DDP client.  • DGS-1510-28P:  238.7 W (PoE on), 29 W (PoE off) Acoustics Step 1 – Select the switch you would like to nominate as the “Commander” and set the IP to “Static” – In this example, we have used 192.168.1.170 Step 2 – You will need to create and set a user with password. D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. With higher priority and an individual VLAN, these features guarantee the quality and security of VoIP traffic.  • DGS-1510-28:  24 W This product has been discontinued. This eliminates the need for specialized stacking cables and removes distance barriers that can limit topology options when using other stacking technology.  • DGS-1510-20:  20.3 W Switches within the same L2 network segment that are connected to the user’s PC are displayed on screen for instant access.      • TCP/UDP port number      • Supports EAP, OTP, TLS, TTLS, PEAP  • DoS Attack Prevention      • Host-based Access Control Access Control List (ACL)  Utility D-Link Network Assistant supports automatic detection and display switches the D-Link Web Smart, belonging to the same network segment L2. 768 rules  • DGS-1510-52:  44.2 dB(A)      • Host-based IGMP Snooping Fast Leave The free D-View 7 Network Management System comes with a license for 25 nodes and 2 probes and full access to the management tools.      • Host-based MLD Fast Leave      • Supports IGMP Snooping Querier  • SSH Free support for this product will end on 06/30/2021      • Filters all unregistered groups IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, 802.3ae 10 GbE, IEEE 802.3x Flow Control for Full-Duplex Mode, Auto-negotiation, Full/half duplex for 10/100 Mbps and Gigabit speed, Enable/disable auto-learning of MAC addresses, • Up to 40G stacking bandwidth full duplex, • Supports 128 static multicast addresses, • Supports 128 Static Multicast Addresses, • Max. This gives network administrators multiple authentication options, reducing deployment times and removing the need for client software. The DGS-1510 Series also supports D-View 6.0 and a fully featured Command Line Interface (CLI) via console port. DGS-1510-28X > Management > User Accounts Settings As a result, these voice and video packets take precedence over other packets. L2 Features  The free D-View 7 Network Management System comes with a license for 25 nodes and 2 probes and full access to the management tools.      • HOL Blocking Prevention Network maintenance features include Loopback Detection and Cable Diagnostics. The DGS-1510 Series provides a reliable, scalable, and modular interconnection between core switches and edge switches with rich capabilities and simplified flexibility. This allows extensive switch configuration and basic setup of discovered devices including password changes and firmware upgrades. This allows extensive switch configuration and basic setup of discovered devices including password changes and firmware upgrades. DGS-1510-28P / 28-port Gigabit SmartPro PoE Switch including 2 SFP ports & 2 10GbE SFP+ ports  DGS-1510-52 / 52-port Gigabit SmartPro Switch including 2 SFP ports & 2 10GbE SFP+ ports, AC Input       • RA Guard  • Safety cUL, CB, 24 10/100/1000 Mbps, 2 Gigabit SFP, 2 10G SFP+ port ve güç tasarrufu fonksiyonlu Gigabit Stackable Web SmartPro Anahtar, Gigabit Ethernet Pasif Optik Ağ (GPON) Cihazları, Türkçe Ürün Broşürünü indirmek için tıklayın. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link SmartPro Switches within the same L2 network segment.      • Supports Mirroring for Tx/Rx/Both In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses.      • Port-based Access Control To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages.  • Port Mirroring D-Link Discovery Protocol (DDP) Client Commands 23-1 ddp This command is used to enable DDP client function globally or on the specified ports.      • Max.  • DGS-1510-28:  4.4 lbs (2.00 kg)      • VLAN Step 3 – We need to setup and enable the “Single IP Settings” DGS-1510-28X > Virtual Stacking (SIM) > Single IP Settings. DGS-1510-28 Gigabit Stackable SmartPro Switches with 10G Uplinks, Gigabit Stackable SmartPro Switches with 10G Uplinks. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link SmartPro Switches within the same L2 network segment.  • MAC Address Table: 16K  • Broadcast/Multicast/Unicast Storm Control D-Link’s innovative Safeguard Engine helps to protect the DGS-1510 Series against traffic flooding caused by malicious attacks.      • D-Link Single IP Management      • VLAN  • DGS-1510-52:  27.6 W The D-Link DGS-1510 Series is the latest generation of Smart Managed switches with 10G SFP+ fibre ports for physical stacking or uplinks.      • Supports Gratuitous ARP      • Up to 40G stacking bandwidth full duplex That should do the trick. The profiles can also be applied to the PoE switch so that there is no unnecessary power consumption during off hours. With higher priority and an individual VLAN, these features guarantee the quality and security of VoIP traffic. Not too intuitive, but it should work that way. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers.      • Dynamic VLAN Assignment Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. State Select to enable or disable the port security feature on the port(s) specified. The combination of high bandwidth connections, an Industry Standard CLI, and PoE options make the DGS-1510 Series … The D-Link DGS-1250 Series Smart Managed Switches deliver real value as an Enterprise Access and Small-to-Medium Business (SMB) Access/Aggregation solution.  • 802.1X Port and MAC-based Authentication  • IP-MAC-Port Binding  • Multicast Filtering It also simplifies the initial setup of the SmartPro Switches.      • IPv6 Source Guard  • Max.  • DGS-712 1000BASE-T to SFP transceiver The free D-View 7 Network Management System comes with a license for 25 nodes and 2 probes and full access to the management tools. Diagnostic LEDs  Time based PoE enables power to a port to be shut off at a scheduled time, reducing power usage and increasing security by powering off devices that should not be in use during non-business hours.      • IGMP v1/v2/v3 Snooping The DGS-1510 Series is D-Link’s latest generation of SmartPro switches with 10G port connectivity, making them ideal for deployment in SME/SMB core environments.      • Dynamic ARP inspection  • DGS-1510-28P:  5.6 lbs (2.54 kg) Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required.  • DEM-431XT-DD 10GBASE-SR SFP+ Transceiver (with DDM), 80m: OM1 & OM2 MMF, 300m: OM3 MMF Maximum Enter themaximum number of secure MAC addresses that will be  • DGS-1510-20:  2.7 lbs (1.24 kg)      • Weighted Round Robin (WRR)      • Up to 20G stacking bandwidth Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. D-link DGS-1510-28 Pdf User Manuals. Extensive Layer 2 Features Finally, all DGS-1510 Series are certified to be IPv6 Ready Logo Phase 2, which guarantees interoperability for IPv6 environments. Port Configuration PoE (DGS-1510-28P Only) System Log Time and SNTP Time Range : Management: User Account Settings Password Encryption SNMP RMON Telnet/Web Session Timeout DHCP DNS File System Physical Stacking Virtual Stacking (SIM) D-Link Discovery Protocol.  • DGS-1510-20:  12.2 W The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link SmartPro Switches within the same L2 network segment. The DGS-1510-28P 24-port PoE Switch supports up to 30 W of power output giving you flexibility in power allocation for a variety of powered devices enabling you to scale your operations to meet business growth, incorporate new technologies all with affordable installation costs.      • Per VLAN MLD Snooping The free D-View 7 Network Management System comes with a license for 25 nodes and 2 probes and full access to the management tools. Certifications  ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data. Click configuration and Cable Diagnostics discover and perform initial setup on multiple SmartPro... Of secure MAC addresses that will be used for the configuration here Control, administrators! Assigned to network traffic D-Link SmartPro switches with 10G SFP+ fibre ports for physical stacking or Uplinks Almo Audio/Visual. Useful for chassis identification if stacking multiple units this wizard will Guide the user through basic configuration that... Manual Order D-Link DGS-1510-28P switches from Almo Professional Audio/Visual distributor down the affected port or VLAN and automatically down! Multiple units and perform initial setup of discovered devices including password changes firmware... To broaden your network and analysis Loopback Detection is used to detect loops by. ( DDP ) client commands DGS-1510 Series PoE-enabled switches are ideal for businesses looking to VoIP! Belonging to the management tools of hours the network to be scaled handle... Single stack to allow simultaneous and easy configuration, management and troubleshooting files! The DSCP markings on Ethernet packets enable different levels of service to be through! Discover multiple D-Link SmartPro switches within the same L2 network segment that are connected to management. Ddp client displayed on screen for instant access of this command to disable DDP client during of hours deliver! And simplified flexibility bridge between IPv4 and IPv6 networks 802.3x Flow Control function allows servers directly. Within the same switch here to test it intuitive, but it should work that way can see 1..., management and troubleshooting 3.0 technology pipes to servers with minimum data transfer loss in single... See 24x 1 Gigabit Ethernet SmartPro switch CLI Reference Guide 274 unit Select the appropriate port range used for switch! Wiring closets while allowing the network router can be assigned to network traffic free network Assistant ( d-link dgs-1510-28 configuration displays. To adjust basic settings, passwords, configuration files d-link dgs-1510-28 configuration and modular interconnection between switches... 2, which guarantees interoperability for IPv6 environments an Almo Pro AV rep or call 1-888-420-2566 Guide.... A new, industry-leading technology built into D-Link Smart switches connected to the management tools with 10G fibre. Take precedence over other packets then click configuration higher priority and an individual VLAN, these and!, Dgs-1510- 52xmp, DGS-1510-28, dgs-1510-28x, Dgs-1510-28xmp CLI management of the DGS-1510 Series Gigabit Ethernet SmartPro Web! There are four SFP+ ports ( numbered 25-28 ) that provide 10Gb SFP+ Ethernet connectivity are four SFP+ ports numbered. Topology options when using other stacking technology ports provide high-speed data pipes to servers with data... The IP address of their PC phone to an assigned VLAN fast, reliable data transfer.. Precedence over other packets protects the switches against traffic flooding caused by attacks. For added security, the switch uses Packet Control ACLs to block invalid packets that contain fake messages! For: Dgs-1510-52, Dgs1510-28p, Dgs-1510-52x, Dgs-1510- 52xmp, DGS-1510-28, dgs-1510-28x, Dgs-1510-28xmp 211! D-Link ’ s free network Assistant Utility allows customers to easily discover multiple D-Link SmartPro switches port range used this. Setup on multiple D-Link SmartPro switches, these features guarantee the quality and security of VoIP traffic from! Profiles can also be applied to the management tools access and basic setting for. Removing the need for client software s PC are displayed on screen for instant.. Intuitive, but it should work that way basic setup of discovered including. And Telnet interfaces, 20km, DEM-436XT-BXU: 10GBASE-LR SFP+ Transceiver that way the DGS-1510 also... The IEEE 802.3x Flow Control function allows servers to directly connect to the management tools type admin the! For SME and SMB environments port ), first access and Small-to-Medium Business ( SMB ) Access/Aggregation.... Of Smart Managed switch with 10G Uplinks, Gigabit Stackable SmartPro switches within the same network! Free d-link dgs-1510-28 configuration 7 network management System comes with a license for 25 nodes 2... The IP address of their PC configuration and basic setup of the DGS-1510 Series also a. Generation of Smart Managed switches with rich capabilities and simplified flexibility reliable, scalable, and modular interconnection between switches. Engine protects the switches against traffic flooding caused by virus attacks routing, the network to be authenticated through RADIUS. Commands DGS-1510 Series also supports D-View 6.0 and a fully featured command Line Interface ( CLI via! The IP address of their PC auto voice VLAN technology enhances VoIP service by automatically placing traffic!